RDC 21-K - Tauchbeschichter - Bungard Elektronik GmbH & Co.KG

Dip Coater

RDC 21-K

The RDC 21-K is a machine designed for laboratorydip coating. They can be used to apply liquidphotoresists to e.g. miniature etching parts or othersubstrates, to apply liquid solder mask or any otherkind of protective or technical coating. Today amore and more popular application is the so called:"sol-gel-application". This machine was developedto meet the demand of a greater variety of speeds,iterations, dipping and dripping times and heavierwork-pieces.

Dipping Time: 0 s - 99 h:59 min.:59 s

 

Drip Off Time: 0 s - 99 h:59 min.:59 s

 

Iterations: Up to 1000 times

 

Dimensions (LxWxH): 350 x 500 x 1000 mm

Features

  • illuminated Display 90 x 35 mm with 20 x 4 digits.
  • numeric foil keyboard for easy data entry.
  • up to 10 dip cycles can be stored and loadedagain on demand.
  • Lifting device operated by precision stepper mo-tor.
  • Setting of virtual offset and virtual end switch po-sition prevents unnecessary travel paths andsaves time.
  • You can distinct between fast distance drive andrather slow dipping/coating drive. Each of the 4different drives can be set with an individualspeed. In addition the point of speed change canbe adjusted. This way you can program fastdrives to the vessel and precise drives into andout of the vessel and this in accordance to yourwork-piece and vessel size.
  • Distance speed is separately adjustable from 1 to 9500 mm/min anddip drive and coat drive can be separately set between 1 and 3000 mm
  • On customer request, the RDC 21-K can be equipped with a 0.9°stepper motor. With this motor speeds between 0.5 and 4750mm/min are possible.
  • Other speeds can be achieved by customized gears orlonger/shorter drive distances by adapting the aluminium frame. Askfor an offer!
  • The dipping time as well as the drip-off-time (pause time up and pause time down) are separately ad-justable from 0 s up to 99h : 59min : 59s. This enables the machine not only to coat but also to precisely develop. This is of great importance with certain photo coatings of the miniature etching technology
  • Up to 1000 iterations of a dip routine are possible.
  • lift bar for several work-piece fittings. The dipping height and the sizes of the aluminium profiles can be easily adapted to even dip-coat bulky items.
  • The working range of the lift bar can be adjusted via the control panel. The maximum size of the work-piece is therefore only limited by the maximum lift range of the machine and the size of your cuvette
  • A optional metal ruler on the side of the vertical bar makes it easy to define the necessary positions to be entered into the menu

Options

  • metal ruler
  • stepper motor with 0.9° step angle resolution for speeds between 1.5 and 3500 mm
  • remote controller
  • wall holder for remote controller
  • customer specific frame, drive distances and speeds

Techn. Data

Stroke length: 650 mm

Maximum load: 5 kg

Weight: 12 kg

Dimensions (LxWxH): 350 x 500 x 1000 mm

Insertion speed: Programmable from 1-3000 mm/min
(optional) 0,5-1500 mm/min

Drawing speed: Programmable from 1-9500 mm/min    
(optional) 0,5-4750 mm/min

Dipping Time: 0 s – 99 h:59 min.:59 s

Drip Off Time: 0 s – 99 h:59 min.:59 s

Iterations: Up to 1000 times

Power supply: 100 – 240V; 50-60 Hz; 100 Watt

Advantages compared to RDC 15

  • Foil keyboard for easy data entry
  • Virtual end switch avoids unnecessary drives
  • Separate speed settings for dipping, coating and positioning drives possible
  • Stronger Stepper motor enables a 4-times higher load (5 kg instead of 1,5 kg).
  • Minimum speed down to 1 mm/min. As an option 0.5 mm minimum speed also possible
  • Parameters are stored for the next job after switching off machine
  • Controller is tiltable and removeable
Features
  • illuminated Display 90 x 35 mm with 20 x 4 digits.
  • numeric foil keyboard for easy data entry.
  • up to 10 dip cycles can be stored and loadedagain on demand.
  • Lifting device operated by precision stepper mo-tor.
  • Setting of virtual offset and virtual end switch po-sition prevents unnecessary travel paths andsaves time.
  • You can distinct between fast distance drive andrather slow dipping/coating drive. Each of the 4different drives can be set with an individualspeed. In addition the point of speed change canbe adjusted. This way you can program fastdrives to the vessel and precise drives into andout of the vessel and this in accordance to yourwork-piece and vessel size.
  • Distance speed is separately adjustable from 1 to 9500 mm/min anddip drive and coat drive can be separately set between 1 and 3000 mm
  • On customer request, the RDC 21-K can be equipped with a 0.9°stepper motor. With this motor speeds between 0.5 and 4750mm/min are possible.
  • Other speeds can be achieved by customized gears orlonger/shorter drive distances by adapting the aluminium frame. Askfor an offer!
  • The dipping time as well as the drip-off-time (pause time up and pause time down) are separately ad-justable from 0 s up to 99h : 59min : 59s. This enables the machine not only to coat but also to precisely develop. This is of great importance with certain photo coatings of the miniature etching technology
  • Up to 1000 iterations of a dip routine are possible.
  • lift bar for several work-piece fittings. The dipping height and the sizes of the aluminium profiles can be easily adapted to even dip-coat bulky items.
  • The working range of the lift bar can be adjusted via the control panel. The maximum size of the work-piece is therefore only limited by the maximum lift range of the machine and the size of your cuvette
  • A optional metal ruler on the side of the vertical bar makes it easy to define the necessary positions to be entered into the menu
Technische Data

Stroke length: 650 mm

Maximum load: 5 kg

Weight: 12 kg

Dimensions (LxWxH): 350 x 500 x 1000 mm

Insertion speed: Programmable from 1-3000 mm/min
(optional) 0,5-1500 mm/min

Drawing speed: Programmable from 1-9500 mm/min    
(optional) 0,5-4750 mm/min

Dipping Time: 0 s – 99 h:59 min.:59 s

Drip Off Time: 0 s – 99 h:59 min.:59 s

Iterations: Up to 1000 times

Power supply: 100 – 240V; 50-60 Hz; 100 Watt

Advantages compared to RDC 15
  • Foil keyboard for easy data entry
  • Virtual end switch avoids unnecessary drives
  • Separate speed settings for dipping, coating and positioning drives possible
  • Stronger Stepper motor enables a 4-times higher load (5 kg instead of 1,5 kg).
  • Minimum speed down to 1 mm/min. As an option 0.5 mm minimum speed also possible
  • Parameters are stored for the next job after switching off machine
  • Controller is tiltable and removeable
Options
  • metal ruler
  • stepper motor with 0.9° step angle resolution for speeds between 1.5 and 3500 mm
  • remote controller
  • wall holder for remote controller
  • customer specific frame, drive distances and speeds

Dip Coater

All specifications are subject to change without notice.